___ Boiled linseed oil Painteco ___

Boiled linseed oil is heated using special technology without adding any chemical components. Uniquness of the product is that it is perfectly absorbed in the wood (to a depth of 2 mm) and protects the treated surface against weathering. Boiled linseed oil does not peel and its impact on the wood can be compared with the well-known principle of Gore-tex, - coating allows the wood to "breathe" at the same time repelling water.

It is advisable that boiled linseed oil is applied on the surface rubbing into the wood rather than performing traditional painting activity. That is why treating the wood with boiled linseed oil is commonly known as soaking rather than painting. Boiled linseed oil is applied in 2-3 thin layers, allowing each layer to dry for 24 hours. Surface is treated using flat brush or cloth. It is important that surface treated by boiled linseed is not located in the direct sunlight as then oil will dry too quickly and loose its water repelling qualities.

Properties and applications of boiled linseed oil.

Application:

• To protect the wood surface from moisture.
• For the treatment of log cabins, saunas, wooden floors, ceilings, railings, garden furniture etc.
• For protect boat surface (primary treatment or remedial work)
• Restoration works (processing of wooden facades of houses, stairs, windows, etc.)
• As an additive in oil paints

Features:

• Natural product
• Emphasizes the texture of wood
• Good protection against weathering
• Ease of use

Storage:

• Store at 30 ° C for 24 months from the manufacture date.

Getting started:

• The surface must be dry, clean, free from residues of wood resin and erosion of wood.

Applicable tool:

• Work with a brush, roller or spray.

Progress:

• Work carried out at a temperature not lower than 5 º C and relative humidity less than 70%

Cleaning:

• Clean brushes and equipment with turpentine.

Requirements to the surface:

• Wood surface must be untreated and not impregnated

Surface preparation:

• Delete the erosion products of wood, clean the remnants of resin, fill any cracks and defects.
• Remove any dust from the surface.

Consumption:

• Consumption apr. 60-90 ml/m², 1 liter of boiled oil covers 10-15m² surface (first layer). When applying the second layer, consumption will be less - depending on the porosity of wood.

Drying:

• At 20 º C and relative humidity of less than 70% - about 24 hours per layer.

Precautions:

• During treatment and after it is necessary to ensure good ventilation premises.
• Be sure to store used brush and work clothes far from open flame because of possible fire. Product itself is not self-igniting.
• Keep away from children!
• Do not drink!